Dingocroft (Penn Rental Service Ltd t/a) Water pumps and viscous units

Replacement Water Pump S2a & S3 Ref: STC3758D
Replacement water pump for 2.25 litre petrol and diesel engines. This is the '9 hole' pump for civillian Land Rovers. Military Land Rovers quite often have a '7 hole' pump. The holes refer to the mounting holes for the pump. Supplied with gasket.
Application: Series 2A (not Series 2) and Series 3 2.25litre engines.
Approximate dimensions: 27cm x 14cm, height of spindle 10cm.
Photo of pump's rump
Price: £24.00 (£27.60 Including VAT at 15%)

Repair kit for Water Pump S2 & S3 Ref: RTC3072D
Replacement repair kit for water pump. This is for the masochist who has a hydraulic press!
Application: Series 2A and Series 3 2.25 litre petrol and diesel engines. Also applicable to Ser2 and military engines with appropriate gasket.
Kit comprises shaft with bearing, impellor, eal, fan hub and 9 hole gasket.
Price: £10.95 (£12.59 Including VAT at 15%)

Replacement Water Pump for Defender Ref: STC635D
Replacement water pump for Defender, supplied with gasket.
Application: 2.5 litre diesel and 2.5 litre petrol with air con and A127 alternator. 2.5 diesel turbo standard and air con versions.
Approximate dimensions: 29cm x 15cm, spindle height 13cm
Rump of the pump ....
Price: £35.00 (£40.25 Including VAT at 15%)

Replacement Water Pump Defender 200TDi Ref: STC639D
Replacement water pump with gasket.
Application: Defender 200TDi.
Approximate dimensions: 29cm x 15cm, spindle height 12.5cm
Rump of the pump ....
Price: £41.85 (£48.13 Including VAT at 15%)

Replacement Viscous Unit 2.5Dt & 200TDi Ref: ETC7238=
Replacement viscous unit.
Application: Defender 2.5DT UK & Europe, 200TDI UK & Europe in Defender, Discovery and Classic Range Rover.
Approximate dimensions: overall diameter 15cm, height 5.7cm, left hand thread mounting nut 32mm across flats.
View of the other side ....
Price: £56.25 (£64.69 Including VAT at 15%)

Replacement Water Pump V8 Ref: STC1611D
Replacement water pump supplied with gasket. Non viscous unit type, fan is bolted directly to pump.
Application: Range Rover Classic carb engines to approx 1980, Defender V8 non air con.
Approximate dimensions: 27cm x 20cm, spindle height 16.5cm.
Rump of the pump ....
Price: £24.00 (£27.60 Including VAT at 15%)

Replacement Water Pump for V8 Defender Ref: STC488D
Replacement water pump for Defender V8 with air conditioning. From 1984 to approx 1994.
Approximate dimensions: 27.5cm x 20cm, spindle height 14cm
Supplied with gasket.
Rear view
Price: £44.10 (£50.72 Including VAT at 15%)

Replacement Water Pump for V8 EFI Ref: STC483D
Replacement water pump for V8 EFi engines, both 3.5 and 3.9 litre. Supplied with gasket.
Application: Discovery 1 1989 to 1994, Range Rover Classic 1986 to 1994.
Aproximate dimensions: 27.5cm x 20cm , spindle height 14cm
View of the rump of the pump
Price: £47.50 (£54.63 Including VAT at 15%)

Replacement Water Pump for 200TDi Ref: RTC6395D
Replacement water pump for 200TDi engines. Supplied with gasket.
Application: Discovery and Range Rover Classic, NOT Defender.
Approximate dimensions: 27cm x 17cm, spindle height 12.5cm
Rear view of pump
Price: £45.00 (£51.75 Including VAT at 15%)

Genuine Water Pump 300TDi Ref: PEB500090
Genuine Land Rover water pump with gasket.
Application: 300TDi engine when fitted to Defender, Discovery or Range Rover Classic.
Approximate dimensions: 21.5cm x 12.5cm, spindle height 6cm.
Engine side of pump .....
Price: £43.58 (£50.12 Including VAT at 15%)

Replacement Vscous Unit 300TDi Ref: ERR2266=
Replacement viscous unit for 300TDi engines.
Application: Discovery 1994 to 1999, Defender 1994 to 2002ish, Range Rover Classic 1994 to 1995.
Approximate dimensions: overall diameter 165mm, height 70mm. Left hand thread mounting nut 32mm across flats.
View of the other side
Price: £55.20 (£63.48 Including VAT at 15%)

Replacement Water Pump V8 Serpentine Engines Ref: STC4378D
Application: Rover V8 engines in the following models; Discovery 1 1995 to 1998, Discovery 2, Range Rover 38A (second generation). These are the serpentine belt engines 4.0 litre and 4.6 litre.
Description: Replacement water pump and gasket.
Approximate dimensions: Overall length 260mm (10.2"), end of spindle to casting face 110mm (4.33"), overall width 150mm (5.9").
Click for view of rear .....
Price: £55.00 (£63.25 Including VAT at 15%)

Replacement Viscous Unit - V8 Serpentine Engine Ref: ERR3443=
Replacement viscous drive unit for cooling fan.
Application: Discovery V8 from 1994 to 1999, Range Rover Classic 1994 to 1995, Defender V8i (not NAS models). This is for engines using a multi-groove serpentine auxilliary drive belt.
Approximate dimensions: overall diameter 17cm, height 7cm, mounting has left hand thread and is 36mm across flats.
View of the other side
Price: £75.00 (£86.25 Including VAT at 15%)