Dingocroft (Penn Rental Service Ltd t/a) Franklin (and others) Automotive Service Tools

Spanner for propshaft nuts and bolts Ref: ZZBRIRJ562A
9/16" A/F combination spanner by BRITOOL. The correct size for propshaft nuts and bolts. A quality spanner that provides a good tight grip on those propshaft nuts and bolts.
You need two of these to do the job.
Approximate dimensions: overall length 190mm.
Price: £5.89 (£6.92 Including VAT at 17.5%)

Whitworth combination spanner set Ref: ZZELORA205S6W
Set of six Whitworth combination spanners by ELORA for use on early Land Rovers (these sizes also crop up on some later vehicles in odd corners).
Sizes are - 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
ELORA are a quality German manufacturer.
Price: £43.04 (£50.57 Including VAT at 17.5%)

Spanner for Viscous Coupling Ref: ZZFRA0432
Application: Most 4 cylinder and V8 engines.
Description: 32mm spanner for removal of the viscous unit on many engine cooling fans
Weight: 0.315kg

Price: £6.50 (£7.64 Including VAT at 17.5%)

Straight circlip pliers Ref: ZZFRA2050
Application: Universal joint removal/replacement and other uses.
Description: Basic straight nosed circlip pliers convertible external & internal 13-50mm diameter. 200mm in length
Weight: 0.148kg

Price: £6.70 (£7.87 Including VAT at 17.5%)

Simple circuit tester. Ref: ZZFRA4568
Application: Universal.
Description: Simple circuit tester of the screwdriver type with lead and crocodile clip
Price: £1.58 (£1.86 Including VAT at 17.5%)

Oil Suction Gun Ref: ZZFRAC127
Application: All those awkward to fill gearboxes, swivel housings etc.
Description: Oil suction gun, 500ml capacity - ideal for filling gearboxes, axles etc

Price: £12.65 (£14.86 Including VAT at 17.5%)

Lever arm grease gun Ref: ZZFRAC128
Application: Grease nipples on all models.
Description: Lever arm grease gun for cartridges or tub grease
Weight: 1.547kg

Price: £13.95 (£16.39 Including VAT at 17.5%)

Masterflare Brake Flaring Tool Ref: ZZFRAF2000
Brake flaring kit. Can be used both on and off the vehicle. Produces both single and double flares in 3/16" SAE tube and single flares on 4.75mm DIN tubing. Full range of spares and additional collet & punch sets for other diameter tubes.
Practical Classics best buy.
Price: £65.25 (£76.67 Including VAT at 17.5%)

Double ended valve grinding stick Ref: ZZFRAFF15L
Application: All models.
Description: Double ended valve grinding stick with 19mm & 22mm diameter suction pads.
Weight: 0.028kg

Price: £1.00 (£1.18 Including VAT at 17.5%)

27mm socket 1/2" drive Ref: ZZFRAFT227
Application: Wheel nuts on most models (not S1 or S2A).
Description: 27mm impact socket with 1/2" drive. 6 point type to give maximum drive with minimum chance of slip. Can be used with ZZFRATA720, 24" breaker bar to remove even the most stubborn wheel nuts.

Price: £3.00 (£3.53 Including VAT at 17.5%)

30mm socket 1/2" drive Ref: ZZFRAFT230
Application: 300TDI crank bolt.
Description: 30mm impact socket with 1/2" drive. 6 point type to give maximum drive with minimum chance of slip. Can be used with ZZFRATA720, 24" breaker bar to remove even the most stubborn crank bolt.
Weight: 0.214kg

Price: £3.00 (£3.53 Including VAT at 17.5%)

Spark plug socket 14mm Ref: ZZFRAFT3814
Application: V8 and 4 cylinder petrol engines with 14mm spark plugs .
Description: Spark plug socket for 14mm plugs. 3/8" square drive with integral universal joint.
Weight: 0.145kg

Price: £12.54 (£14.73 Including VAT at 17.5%)

Wrinkle band piston ring compressor Ref: ZZFRATA118
Application: All models.
Description: Wrinkle band piston ring compressor - capacity 76-127mm diameter. Cam action locking allows the correct size to be pre-set for a full set of pistons. Low friction wrinkle form reduces sticking and helps to stop tool from slipping into the cylinder.

Price: £10.25 (£12.04 Including VAT at 17.5%)

Piston ring groove cleaner Ref: ZZSEAVS148
Application: All models.
Description: Piston groove cleaner. The ideal tool for removing hard carbon deposits in the ring grooves on pistons prior to fitting new rings. Suitable for pistons from 51mm diameter to 127mm diameter. Comes with 3x 6 bladed cutters for different groove widths.

Price: £14.95 (£17.57 Including VAT at 17.5%)

Adjustable engine cylinder hone Ref: ZZFRTA140
Application: All models.
Description: Adjustable engine cylinder hone - 50-180mm diameter. For honing/deglazing bores, supplied with three 4" medium grade stones
Weight: 0.450kg

Price: £23.50 (£27.61 Including VAT at 17.5%)

Thread chaser for spark plug holes Ref: ZZFRTA1814
Application: V8 and 4 cylinder petrol engines with 14mm spark plugs.
Description: Thread chaser for spark plug holes 14mm & 18mm. Reclaims damaged threads in cylinder heads. Also suitable for that vintage car in your garage!

Price: £5.90 (£6.93 Including VAT at 17.5%)

Carb adjust tool for CD175 Ref: ZZFRATA245
Application: V8 and 6 cylinder petrol engines with CD175 carburetors.
Description: Carburetor adjustment tool for CD175. Suitable for both early and late top adjust types.

Price: £5.64 (£6.63 Including VAT at 17.5%)

Ball Joint Separator Ref: ZZFRATA330
Application: Steering and anti-roll bar ball joint removal .
Description: Ball Joint Separator. Drop forged steel. 22mm jaw. Two stage operation provides 30mm and 56mm maximum opening.

Price: £24.95 (£29.32 Including VAT at 17.5%)

Oil Filter Pliers - 250mm long Ref: ZZFRATA374
Oil filter pliers. Overall length 250mm. Capacity 45mm to 89mm diameter filter. Designed for releasing stubborn filters, especially where access is limited. For example TD5 engines.
Price: £7.75 (£9.11 Including VAT at 17.5%)

Metric dial gauge. Ref: ZZFRATA453
Application: Universal.
Description: Metric dial gauge - used for engine timing on 2.25 diesel, setting end floats, etc, etc. Range 0 - 8mm, divisions 0.01mm. Adjustable locking bezel, plus 2 reference pointers.

Price: £37.50 (£44.06 Including VAT at 17.5%)

Diesel timing set 2.5, 2.5DT, 200tdi & 300tdi. Ref: ZZFRATA490
Application: 200 Tdi, 300 Tdi, & 2.5 diesels.
Description: Diesel timing set 2.5, 2.5DT, 200tdi & 300tdi - kit contains crank damper puller, fuel pump gear locker and timing pins. Now includes EDC manual transmission timing pin.

Price: £76.55 (£89.95 Including VAT at 17.5%)

Angular torque gauge Ref: ZZFRATA66
Application: Universal.
Description: Angular torque gauge 1/2" square drive. Used mainly on cylinder head bolts where an angular torque setting is specified.

Price: £13.50 (£15.86 Including VAT at 17.5%)

4 piece Mini Pick Set Ref: ZZFRATA679
Application: Universal
Description: 4 piece mini pick set, straight, hook, 90deg &'O' ring pick. A useful selection of 'picks' that come in for a varied range of obscure and un-thought-of tasks. Every tool kit should have these.

Price: £5.24 (£6.16 Including VAT at 17.5%)

Compression tester, petrol engines Ref: ZZFRATA680
Application: Petrol engines.
Description: Compression tester for petrol engines. Reads 0-300psi (0-20 bar). Comes with adaptor for M14 & M18 plug holes, plus a M14 40mm extension. Has built in releif valve.

Price: £26.90 (£31.61 Including VAT at 17.5%)

10pce set of 'crowsfoot' spanners Ref: ZZFRATA701
Application: Universal.
Description: 10peice set of 'crowsfoot' spanners on rail 3/8" square drive, sizes 10, 11, 13, 14, 15, 17, 19, 21, 22, 24mm. Useful to access nuts and bolts where full sockets or open-ended wrenches cannot.

Price: £10.94 (£12.85 Including VAT at 17.5%)

24" breaker bar 1/2" square drive Ref: ZZFRATA720
Application: Universal .
Description: 24" (60cm) long breaker bar, 1/2" square drive. For those recalcitrant nuts and bolts.

Price: £18.84 (£22.14 Including VAT at 17.5%)

32mm deep socket Ref: ZZFRATA728
Application: V8 crank bolt 32mm A/F
Description: 32mm socket 1/2" square drive. Fits 300TDI crank bolt.

Price: £5.92 (£6.96 Including VAT at 17.5%)

41mm deep socket Ref: ZZFRATA729
Application: 4cyl metric engines to 1988.
Description: 41mm socket 1/2" square drive. Fits ETC7934 crank bolt, as fitted to 4 cylinder metric engines up to 1988.

Price: £8.10 (£9.52 Including VAT at 17.5%)

Flare nut wrench 11mm x 10mm Ref: ZZFRATA751
Application: Universal.
Description: Flare nut wrench 11mm x 10mm. Brake union spanner, fits both metric and imperial.
Price: £1.85 (£2.17 Including VAT at 17.5%)

Flexible brake hose clamp Ref: ZZFRATA767
Application: Universal
Description: Brake hose clamp, one handed use. Rounded plastic jaws prevent damage to hose.

Price: £5.54 (£6.51 Including VAT at 17.5%)

Hose clamp medium size Ref: ZZFRATA768
Application: Universal
Description: Hose clamp, one handed use. Suitable for small diameter water hoses. Rounded plastic jaws prevent damage to hose.

Price: £5.95 (£6.99 Including VAT at 17.5%)

Hose clamp large size Ref: ZZFRATA769
Application: Universal.
Description: Hose clamp, one handed use. Suitable for radiator hoses. Rounded plastic jaws prevent damage to hose.

Price: £8.55 (£10.05 Including VAT at 17.5%)

Valve spring compressor Ref: ZZFRATA777
Application: Universal.
Description: Valve Spring Compressor capacity 75-165mm, throat clearance 150mm. Suitable for all Land Rover engines with over head valves (except MPi).

Price: £16.40 (£19.27 Including VAT at 17.5%)

4piece metric measuring set Ref: ZZFRATA840
Application: Universal.
Description: 4 peice metric measuring set. Comprising Micrometer 0-25mm accurate to 0.01mm with micrometer wrench, Vernier Caliper 0-150mm with integral depth gauge, 150mm Steel Rule and Precision Square 100mm. Supplied in hinged plastic storage case.

Price: £37.50 (£44.06 Including VAT at 17.5%)

Vernier caliper to 6"/ 150mm Ref: ZZFRATA841
Application: Universal.
Description: Dual reading vernier calipers with depth gauge. Range 0 - 15cm (0 - 6"). Supplied in hinged plastic case.
Weight: 0.262kg

Price: £12.50 (£14.69 Including VAT at 17.5%)

Magnetic base for dial gauge Ref: ZZFRATA845
Application: Universal.
Description: Magnetic base for mounting dial gauge ZZFRATA453 and similar devices.

Price: £37.50 (£44.06 Including VAT at 17.5%)

Spreader for caliper pistons Ref: ZZFRATA898
Application: Range Rover Classic, Discovery 1 and Defender.
Description: Spreader for caliper pistons.

Price: £18.96 (£22.28 Including VAT at 17.5%)

Socket for hub nuts Ref: ZZFRATA952
Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

Price: £25.38 (£29.82 Including VAT at 17.5%)

33pce set of security bits Ref: ZZFRATP400
Application: All vehicles post 1985.
Description: 33 piece security bit set. Including Torq, Tri-wing, Star and other strangely headed screw driver bits.

Price: £10.50 (£12.34 Including VAT at 17.5%)

33pce set screwdriver bits Ref: ZZFRATP500
Application: Universal.
Description: 33 piece screwdriver bit set. Including blade, Pozidrive, Phillips, Star and Hex.

Price: £4.80 (£5.64 Including VAT at 17.5%)

Torx T55 socket Ref: ZZFRATS55
Application: R380 manual gearbox.
Description: Torx T55 socket, 3/8" square drive. Fits the filler plug on the R380 gearbox.

Price: £5.29 (£6.22 Including VAT at 17.5%)