Dingocroft (Penn Rental Service Ltd t/a) Engine Tools

Crank Timing Pin BMW Ref: ZZLRT-12-108
Application: 2nd Generation Range Rover (38A) 1995 to 2001 when fitted with BMW diesel engine.
Description: Crankshaft timing pin.
BMW tool number: 11-2-300
Approximate dimensions: overall length 129mm (5.1"), overall diameter 12.5mm (0.5").
Price: £21.79 (£25.60 Including VAT at 17.5%)

Camshaft Position Plate - BMW Ref: ZZLRT-12-112
Application: 2nd Generation Range Rover (38A) 1995 to 2001 when fitted with BMW diesel engine.
Description: Tool to lock camshaft in position for timing and similar operations.
BMW tool number: 11-3-320
Price: £137.30 (£161.33 Including VAT at 17.5%)

Pair of Tensioner Pins - BMW Ref: ZZLRT-12-114
Application: 2nd Generation Range Rover (38A) 1995 to 2001 when fitted with BMW diesel engine.
Description: Pair of pins for retaining the timing chain tensioners.
BMW tool number: 11-3-340
Price: £11.86 (£13.94 Including VAT at 17.5%)

Wrench for Injector Pipes Ref: ZZLRT-12-117
Application: BMW diesel in Range Rover 2, 1995 to 2001.
Description: wrench for injector pipes.
Price: £43.11 (£50.65 Including VAT at 17.5%)

Injector Pump Remover - BMW Ref: ZZLRT-12-119
Application: Range Rover 38A (1994- 2001) fitted with BMW 2.5 diesel engine.
Description: Tool to remove fuel injection pump from BMW diesel engine. It also holds drive gear for pump in position until pump is replaced.
BMW tool number: 13-5-120
Price: £75.00 (£88.13 Including VAT at 17.5%)

Injection Pump Timing Guage Holder Ref: ZZLRT-12-121
Application: Range Rover 38A 1995 to 2001 fitted with BMW diesel engine.
Description: To fit timing gauge onto fuel injector pump.
BMW tool number: 13-5-330
Price: £48.29 (£56.74 Including VAT at 17.5%)

Speed Sensor Mandrel Ref: ZZLRT-12-122
Application:: Range Rover 38A 1995 to 2001 when fitted with BMW 2.5 litre diesel engine.
Description: Mandrel for aligning the crankshaft speed sensor.
BMW tool number: 13-6-020
Price: £22.60 (£26.56 Including VAT at 17.5%)

Gudgeon Pin Tool Ref: ZZLRT-12-126
Application: All Rover V8 engines.
Description: Tool to remove and replace gudgeon pins (wrist pins) on V8 pistons. Also needs 12mm or 1/2" diameter bolt and nut approx 30cm (12") long.
Price: £73.56 (£86.43 Including VAT at 17.5%)

Camshaft Locking Tools Ref: ZZLRT-12-134
Pair of locking tools for camshafts on twin overhead camshaft engine.
Application: Freelander 1.8 petrol engine (18k)
Price: £16.43 (£19.31 Including VAT at 17.5%)

Cylinder Pressurisation and Collet Removal Kit Ref: ZZLRT-12-142
Application: Freelander 1.8 litre petrol 1997 to 2006.
Description: Used with LRT-12-071 & LRT-12-139 for the removal and replacement of valve stem seals. Adaptor screws into spark plug hole and pressurises cylinder via airline. This keeps valves closed and allows sleeve part to remove spring collets.
Price: £101.02 (£118.70 Including VAT at 17.5%)

Tensioning Tool for Camshaft Belt Ref: ZZLRT-12-143
Tensioning tool for camshaft/timing belt.
Application: Freelander fitted with L series 2.0litre diesel engine.
Price: £25.49 (£29.95 Including VAT at 17.5%)

Flywheel Locking Tool 1.8P Freelander Ref: ZZLRT-12-145
Application: Freelander 1.8 Petrol.
Description: Flywheel locking tool for Freelander 1.8 petrol engine.
Price: £46.52 (£54.66 Including VAT at 17.5%)

Remover, Camshaft Oilseals Ref: ZZLRT-12-147
Remover for the camshaft oilseals on twin overhead camshaft engine.
Application: Freelander 1.8 petrol engine (18K).

NB. this tools needs to be used in conjunction with ZZLRT-12-129 or metric fine bolt M16 1.5mm pitch by 100mm long (ANR2570 is a possible alternative)
Price: £40.86 (£48.01 Including VAT at 17.5%)

Replacer Camshaft Oilseals Ref: ZZLRT-12-148A
Replacer for camshaft oilseals on twin overhead camshaft engine.
Application: Freelander 1.8 petrol engine (18K)
Price: £15.53 (£18.25 Including VAT at 17.5%)

Clutch Centralising Tool TD5 Ref: ZZLRT-12-152
Description: Tool to centralise clutch disc to flywheel.
Application: Defender 2002 on fitted TD5 engine, Discovery II 2002 on fitted with TD5 engine
Price: £17.79 (£20.90 Including VAT at 17.5%)

Injector Remover TD5 Ref: ZZLRT-12-154-1
Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

Price: £63.66 (£74.80 Including VAT at 17.5%)

Sleeve for 'O' Ring Fitting Ref: ZZLRT-12-154/2
Application: Defender and Discovery 2 where fitted with TD5 engine.
Description: Sleeve to guide 'O' rings into groove on injectors.
Approximate dimensions: Overall length 10cm (4"), overall diameter 29.5mm (1.16").
Price: £25.03 (£29.41 Including VAT at 17.5%)

Insertion Tool for Injector Washer Ref: ZZLRT-12-154/3
Application: Defender and Discovery 2 where fitted with TD5 engine.
Description: Tool for correct insertion of injector sealing washer.
Approximate dimensions: Length 25mm (1"), overall diameter 25mm (1").
Price: £10.16 (£11.94 Including VAT at 17.5%)

Removal Tool for Injector Washers on TD5 Ref: ZZLRT-12-154-4
Application: Defender 2002 on fitted TD5 engine, Discovery II 2002 on fitted with TD5 engine.
Description: Removal tool for injector washers.
Price: £56.49 (£66.38 Including VAT at 17.5%)

Crank Timing Pin for TD5 Ref: ZZLRT-12-158
Application: TD5 engine fitted to Defender and Discovery 2.
Description: Tool for locking crankshaft whilst working on valve train.
Overall length approximately 11.4cm.
Price: £22.87 (£26.87 Including VAT at 17.5%)

Wrench for Locking Crank Pulley Ref: ZZLRT-12-161
Application: Freelander with KV6 2.5 litre V8 engine.
Description: Wrench to lock/hold crankshaft pulley during timing operations. Used with ZZLRT-12-199 extention handle.
Approximate dimensions: Length 21.5cm (8.46"), hexagonal 69mm (2.72").
Price: £56.35 (£66.21 Including VAT at 17.5%)

Wrench Belt Tensioner TD4 Ref: ZZLRT-12-163
Application: Freelander 1 from 2001 with TD4 engine.
Description: Long armed wrench for tensioning drive belt.
Approximate dimensions: overall length 58cm (22.8").
Price: £48.71 (£57.23 Including VAT at 17.5%)

Pair of Locking Pins Ref: ZZLRT-12-172
Application: TD4 diesel engine in Freelander, TD6 diesel engine in Range Rover Generation 3.
Description: Pair of locking pins to lock timing chain tensioner.
Overall length 11cm.
Price: £10.41 (£12.23 Including VAT at 17.5%)

Camshaft Locking Tool TD4 Ref: ZZLRT-12-173
Application: Freelander 1 from 2001 fitted with TD4 engine.
Description: Locking tool for camshaft for timing purposes.
Approximate dimensions: overall length 170mm (6.7"), height 92mm (3.6"), thickness 10mm (0.375").
Price: £116.91 (£137.37 Including VAT at 17.5%)

Camshaft Holding Tool TD4 Ref: ZZLRT-12-174
Application: Freelander 1 from 2001 fitted with TD4 engine.
Description: Camshaft holding tool for timing and rebuilding purposes.
Price: £69.79 (£82.00 Including VAT at 17.5%)

Locking Tool for Cam Pulleys Ref: ZZLRT-12-175
Application: Freelander V6 petrol (gasolene) engine.
Description: Tool for locking the camshaft pulleys on the V6 engine.
Approximate dimensions: overall length 190mm, diameter of large end 79mm, diameter of small end 48mm.
Price: £71.21 (£83.67 Including VAT at 17.5%)

Injection Pump Gear Remover/Holder Ref: ZZLRT-12-178
Description: Tool to remove and then hold in place the drive gear for the injection pump.
Application: Freelander fitted with the TD4 diesel engine.
Price: £39.22 (£46.08 Including VAT at 17.5%)

Camshaft Pulley Holding Tool Ref: ZZLRT-12-182
Application: Freelander 1 with 1.8 litre petrol engine.
Description: Tool to hold the camshaft pulley during engine timing and repair operations.
Overall length: 50cm (19.7")
Price: £70.69 (£83.06 Including VAT at 17.5%)

Pair of Cambelt Spreaders Ref: ZZLRT-12-195
Application: Freelander V6 petrol (gasolene) engine.
Description: Pair of tools for spreading the cambelt when setting timing or changing the timing belt. Each spreader is approximately 35mm x 31mm x 20mm.
Price: £68.47 (£80.45 Including VAT at 17.5%)

Camshaft Locking Tools - Pair Ref: ZZLRT-12-196
Application: Freelander fitted with KV6 2.5 litre V6 petrol (gasolene) engine.
Description: Pair of tools for locking the camshafts in place for timing purposes or to change cam belts.
Price: £113.54 (£133.41 Including VAT at 17.5%)

Wrench Adaptor for Camshaft Ref: ZZLRT-12-197
Application: Freelander V6 petrol (gasolene) engine.
Description: Wrench adaptor for camshaft to allow easy rotation of camshaft for setting timing. Tool is 50mm across flats and is 17mm high.
Price: £23.32 (£27.40 Including VAT at 17.5%)

Pair of Camshaft Locating Pins Ref: ZZLRT-12-198
Application: Freelander V6 petrol (gasolene) engine.
Description: Pair of pins for locating/locking the camshafts while setting up timing or changing the timing belt. Each pin is approximately 100mm long.
Price: £17.98 (£21.13 Including VAT at 17.5%)

Handle for Crank Pulley Wrench Ref: ZZLRT-12-199
Application: Freelander with KV6 2.5 litre V6 petrol (gasolene) engine.
Description: Extension handle for crank pulley locking wrench ZZLRT-12-161.
Approximate dimensions: Length 51.5cm (20.3").
Price: £51.80 (£60.87 Including VAT at 17.5%)

Wrench for Viscous Fan - Range Rover 3 Ref: ZZLRT-12-214
Description: Wrench for removing the viscous fan - 32mm across flats. Overall length - 60cm.
Application: Range Rover Generation 3 from 2002 on, fitted with TD6 engine and V8 petrol.
Price: £41.99 (£49.34 Including VAT at 17.5%)

Related products:

1. Holding Tool for Water Pump (Ref: ZZLRT-12-215)

Holding Tool for Water Pump Ref: ZZLRT-12-215
Application: Range Rover Generation 3 with 4.4 litre petrol (gasolene) engine.
Description: Tool for holding water pump to remove the viscous unit. Used with ZZLRT-12-214
Overall length 60cm.
Price: £41.92 (£49.26 Including VAT at 17.5%)

Related products:

1. Wrench for Viscous Fan - Range Rover 3 (Ref: ZZLRT-12-214)

Distance Piece for Valve Guides Ref: ZZLRT-12-515
Application: V8 to 1994, 4 cylinder Series engines, 200TDi and 300TDi.
Description: Height guage for fitting of valve guides, used with ZZLRT-12-046.
Approximate dimensions: Height 19mm (0.75"), internal diameter 15.5mm (0.61"), outside diameter 31.5mm (1.24").
Old tool number: RO605774A
Price: £15.59 (£18.32 Including VAT at 17.5%)