Dingocroft (Penn Rental Service Ltd t/a) Drums and shoes. Discs and pads.

Axle Set of Brake Shoes - 10" Ref: STC2796DKIT
Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.
Price: £25.00 (£28.75 Including VAT at 15%)

Anchor Plate for 10inch brake shoes Ref: 236993
Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
Price: £4.50 (£5.18 Including VAT at 15%)

Axle Set of Brake Shoes - 11 inch Rear Ref: STC2797DKIT
Axle set of 4 11inch brake shoes by Mintex plus 4x pull-off springs, 6x imperial brake drum screws and 2x metric brake drum screws.
Application: Rear axle on the following models, Series 2A LWB, Ser 3 LWB and Defender 110 to 1994.
Price: £27.50 (£31.63 Including VAT at 15%)

Axle Set of Brake Shoes - 11" Front Ref: STC3944DKIT
Axle set of 4 11inch bonded brake shoes in plain box plus 4x pull-off springs and 6x brake drum screws.
Application: Front axle on the following models, Series 2A LWB 4cyl and Ser 3 LWB 4cyl.
Price: £21.00 (£24.15 Including VAT at 15%)

Axle Set of Brake Shoes - 11" Front wide type Ref: STC3945DKIT
Axle set of 4 11inch by 3inch wide brake shoes by Mintex plus 4x pull-off springs and 6x brake drum screws.
Application: Front axle on the following models, Series 2A LWB 6cyl, Ser 3 LWB 6cyl and V8 and 101 Forward Control.
Price: £43.90 (£50.49 Including VAT at 15%)

Pair of 10" Brake Drums - non genuine Ref: 591039DKIT
Pair of 10" brake drums equivalent to 591039. These are drilled to accept the larger (16mm) diameter wheel studs. Though non-genuine, these are good quality drums and do run 'true'. Supplied with both metric and imperial retaining screws.
Application: Ser2A SWB from approx 1968, Ser3 SWB and Defender 90 to 1994.
Price: £42.50 (£48.88 Including VAT at 15%)

Pair of 11inch Brake Drums - non-genuine. Ref: 576973DKIT
Pair of 11" brake drums equivalent to 576973. These are drilled to accept the larger (16mm) diameter wheel studs. Though non-genuine, these are good quality drums and do run 'true'. Supplied with both metric and imperial retaining screws.
Application: Ser"A LWB from approx 1969, Ser3 LWB, Ser3 SWB front from 1980, Defender 110 rear to 1994.
Price: £42.50 (£48.88 Including VAT at 15%)

Pair of Front Brake Discs by Lockheed Ref: FRC7329DPAIR
Pair of Lockheed - Delphi boxed solid brake discs.
Application: Defender front 1983 to 2000, Range Rover Classic 1986 to 1989, Discovery 1 1989 to 1999.
Approximate dimensions: overall diameter 30cm, inside diameter 10cm, overall width 7.9cm, thickness of disc 14mm
Price: £39.50 (£45.43 Including VAT at 15%)

Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT01
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of early and late type hub seals, 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Range Rover Classic 1972 to June 1985, either front or rear pair.
Price: £12.50 (£14.38 Including VAT at 15%)

Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT02
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of inner and outer hub seals, 2x hub nut lockers and 2x flange gaskets. Inner oil seals are original equipment by Gaco/Angus, outer are replacement.
Application: Range Rover Classic 1985 to 1989 and non-ABS to JA624516. Discovery up to chassis # JA032850. Either front or rear pair.
Price: £12.50 (£14.38 Including VAT at 15%)

Fitting Kit for a Pair of Discs Ref: BRAKEDISCFITKIT03
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 hub oil seals, choice of 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Range Rover Classic 1990 to 1995 except non-ABS to JA624516. Discovery 1 from chassis # JA032851 onwards. Defender from chassis number LA930435. Either front or rear pair.
Price: £12.50 (£14.38 Including VAT at 15%)

Fitting Kit for a Pair of Discs Ref: BRAKEDISCFITKIT04
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 hub oil seals, 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Defender front only to chassis number LA930434.
Price: £10.49 (£12.06 Including VAT at 15%)

Fitting Kit for a Pair of Brake Discs Ref: BRAKEDISCFITKIT05
Application: Defender 1994 onwards with front and rear disc brakes.
Description: Fitting kit containing 10x screws and lock washers to fix discs to hubs, 2 hub oil seals, 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Price: £10.49 (£12.06 Including VAT at 15%)

Genuine Front Brake Pads Ref: STC9187
Application: Discovery 1 to chassis number KA034313, Classic Range Rover from 1986 to 1989. Vehicles with solid front discs.
Description: Axle set of pads (4 pads) with fitting kit. One pad fitted with wear sensor. Retained by split pins.
Approximate dimensions: each pad is 105mm (4.13") wide and 73mm (2.87") high including the tab.
Price: £33.74 (£38.80 Including VAT at 15%)

Mintex Front Brake Pad Set Ref: STC9187D
Application: Discovery 1 to chassis number KA034313, Classic Range Rover from 1986 to 1989. Vehicles with solid front discs.
Description: Axle set of pads (4 pads). One pad fitted with wear sensor. Retained by split pins.
Not supplied with fitting kit, use STC8573.
Approximate dimensions: each pad is 105mm (4.13") wide and 73mm (2.87") high including the tab.
Price: £18.24 (£20.98 Including VAT at 15%)

Genuine Rear Brake Pads Ref: STC9188
Application: Discovery 1 rear brakes from approximately 1995 when no sensor was fitted.
Description: Set of four genuine boxed brake pads with fitting kit of 4x split pins and four spring clips.
Approximate dimensions: each pad measures 88mm (3.46") by 71mm (2.8").
Price: £32.13 (£36.95 Including VAT at 15%)

Mintex Rear Brake Pad Set Ref: SFP000270D
Application: Discovery 1 rear from approximately 1995. Defender 90 rear from chassis range 2A onwards (2002 model year).
Description: Set of four Mintex brake pads, set number MLB43. No fitting kit supplied, see STC8574.
Price: £14.00 (£16.10 Including VAT at 15%)

Genuine Front Brake Pads - Vented Discs Ref: STC9190
Application: Vented front disc brakes on Range Rover Classic 1990 to 1995 and Discovery 1.
Description: Set of 4 brake pads (one with wear sensor), plus fitting kit of 4x solid pins, 4x springs and 4x 'R' clips.
Approximate dimensions: each pad is 105mm (4.13") wide and 72mm (2.83") high.
Price: £39.74 (£45.70 Including VAT at 15%)

Mintex Front Brake Pads - Vented Discs Ref: STC9190D
Application: Vented front disc brakes on Range Rover Classic 1990 to 1995 and Discovery 1.
Description: Mintex set of 4 brake pads (one with wear sensor) part number MLB116. Not supplied with fitting kit, use STC8575 if required.
Approximate dimensions: each pad is 105mm (4.13") wide and 72mm (2.83") high.
Price: £18.50 (£21.28 Including VAT at 15%)

Genuine Front Brake Pads Ref: STC9191
Application: Discovery 1 front brakes with solid discs from approximately 1995. Where pads are retained by solid pins through holes in pads.
Description: Set of four genuine brake pads. Supplied with fitting kit of 4 springs and 4 small split pins. If main retaining pins required see RTC5001.
Approximate dimensions: each pad measures 105mm (4.13") by 73mm (2.87").
Price: £39.91 (£45.90 Including VAT at 15%)

Mintex Front Brake Pad Set Ref: STC9191D
Application: Discovery 1 front brakes with solid discs from approximately 1995. Where pads are retained by solid pins through holes in pads.
Description: Set of four Mintex brake pads, set number MLB115. Not supplied with fitting kit. See STC8576 and RTC5001
Approximate dimensions: each pad measures 105mm (4.13") by 73mm (2.87").
Price: £16.00 (£18.40 Including VAT at 15%)

Mintex Front Brake Pads Ref: SFP000260D
Application: Defender 90/110/130 front axle 1994 onwards.
Description: Mintex MLB114 axle set of brake pads. No fitting kit supplied - see RTC5001 & STC8576.
Approximate dimensions: each pad measures 126mm (4.96") long x 69mm (2.72") high.
Price: £16.00 (£18.40 Including VAT at 15%)

Brake Pad Fitting Kit Ref: RTC5001
Application: Discovery 1 front brakes with solid discs from approximately 1995. Where pads are retained by solid pins through holes in pads.
Description: Set of four solid pins and 4 small split pins.
Approximate dimensions: eachsolid pin is 84mm (3.3") long and diameter of 6.5mm (0.26").
Price: £3.00 (£3.45 Including VAT at 15%)

Brake Pad Fitting Kit - Front Discs Ref: STC8573
Application: Front axles of the following vehicles with solid discs. Range Rover Classic 1972 to 1989, Discovery 1 to 1993, Defender 90 to 1993.
Description: Set of 4 split pins and 4 springs.
Approximate dimensions: Each split pin is 53mm (2.08") long and 4.5mm (0.18") in diameter. Each spring is 52mm (2.05") long.
Price: £2.38 (£2.74 Including VAT at 15%)

Brake Pad Fitting Kit Ref: STC8574
Application: Rear brake pads on Range Rover Classic 1972 to 1995, Discovery 1 1989 to 1998, Defender 90 1995 onwards.
Description: Set of 4x split pins and 4x spring clips.
Approximate dimensions: split pins are 75mm (2.95") long and 3.5mm (0.14") in diameter.
Price: £2.20 (£2.53 Including VAT at 15%)

Brake Pad Fitting Kit - Front Axle Ref: STC8575
Application: Use with STC9190D, Mintex front brake pads on Range Rover Classic 1990 to 1995 and Discovery 1 where fitted with vented discs.
Description: Brake pad fitting kit comprising 4x solid pins, 4x small split pins and 4x springs.
Approximate dimensions: Each pin is 95mm (3.74") long and 6.3mm (0.25") in diameter.
Price: £3.00 (£3.45 Including VAT at 15%)

Brake Pad Fitting Kit Ref: STC8576
Application: Discovery 1 front brakes with solid discs from approximately 1995. Where pads are retained by solid pins through holes in pads.
Description: Fitting kit of 4 springs and 4 small split pins.

Price: £3.00 (£3.45 Including VAT at 15%)